Anyone on here know fs systems. I have an CNSM rear interior bar in my patrol veh. The shop has told us they don't have replacement leds if the heads go out so they will most times just remove the...
I had one in the UK mid 70s..I went out and bought 3 cheap flashlights that also had magnets, stripped the magnets off and then glued them to the bottom replacing the black rubber vacuum. 50 years...
You could use a handful of diodes and a 5-pin relay to make this happen:
Cut the wire that leads from whatever switch to the brown wire on your flashback.
Connect relay pin 30 to the brown wire...
I got a NAS lightbar rack item number #60AAB-153C with endcaps and installation sheet.
The idea was born to create a custom made lightbar with beacon lights and flasher.
Of course with NAS...
Sale pending on the lot of led heads.
If anyone wants the MR11 style parts then pay just shipping and they are yours. Estimates of 25-75 shipped for those.
This is interesting although I'm not sure this would have come directly from FS this way. While I'm no TS expert (where's Ryan when you need him?!), I think someone with some modest metal...
The guy I got the bar from claims that the truck was delivered with the housing this way, he was on the department and removed the CTS when the department upgraded to LEDs. Also, the speaker is...
This is interesting although I'm not sure this would have come directly from FS this way. While I'm no TS expert (where's Ryan when you need him?!), I think someone with some modest metal...
So the program in the controller that's built into the bar needs to be sending colors to the pods
If you have a bar that has all quad color pods but the program in the bar controller is only...
I had two of those. I converted them to red by taping trailer light lenses overtop, and I removed the suction cups and mounted the beacons to the posts on the headboard of my bed. My fire...
On Facebook marketplace, there is a persone selling two 83 amp 12 volt DC power supplies for 100 total. He will not split them up. I think I'd like one of them to power up my lights and stuff...
I had two of those. I converted them to red by taping trailer light lenses overtop, and I removed the suction cups and mounted the beacons to the posts on the headboard of my bed. My fire...
Don't be too disappointed--a great find even if it's a bit discombobulated! Gary Cahill at Rescue Market probably has a correct tag for it although who's going to really know except you (and the...
Federal Signal was not exactly perfect about following their own serial numbering system, but I'd say what you have is someone's project. I'm thinking it was a 173-A and it was missing its tag...
Interesting recent acquisition, kind of letdown that it wasn't what I was expecting.. but not too disappointed overall.
Beacon Ray 173, on a stanchion mount (sp?) tag had my hopes up as it...
Has anyone come across a Twin speaker cover like this before? It has the cutout for the Visibeam spotlight in it, but then it appears the factory welded a plate on the underside to cover the...