Latest Activity
-
Mmedic550 replied to the thread Federal Signal FS 650 undercover siren.So the 8 pin is a rj45 straight through flat cable. 1–1, 8-8.
-
Sshues replied to the thread Federal Signal FS 650 undercover siren.That's excellent news! I'm happy to hear you got it working. In case someone needs to know this in the future: regarding the flat cable you are using successfully, are the wires in the same...
-
Mmedic550 replied to the thread Federal Signal FS 650 undercover siren.Well I figured out the siren issue. Yes the control head switch needs a power wire. The terminal is a female .110” mini spade.
-
Kelly madaris, Skulldigger can repair this. -
Mmedic550 replied to the thread Federal Signal FS 650 undercover siren.Ok I think I figured out the issue but haven’t confirmed yet. Apparently the little switch box between head and brain requires a positive 12v wire. I look and can’t figure out what terminal I...
-
Sshues replied to the thread Tomar Rect 25 alternative?.How tolerant are you of some minor dimensional differences? Take a look at Whelen's T-Ion. I think the T-Ion will be a little smaller in height and a little longer in length than the Rect 25.
-
Sshues replied to the thread Federal Signal FS 650 undercover siren.The manual I found at...
-
Sshues replied to the thread Federal Signal PA70 No Sound Output.Take several high-quality photos of the siren's main circuit board. Folks here can help identify components from the photos. Someone can probably suss out what's what.
-
Sshues replied to the thread Tornado Sirens.That's most helpful. Thank you, @TDC.
-
EEscalator Slinky replied to the thread Federal Signal PA70 No Sound Output.After looking at the links provided, it does appear to be a connector for a Cinch Jones Plug/Socket 306-CCT. So thanks for providing the link to that! That only solves one of my problems though.
-
TDC replied to the thread Tornado Sirens.https://www.airraidsirens.net/forums/ I went through this site for hours when I was on Light Duty. You can pretty much put "lightbar" in place of "siren" on that site and the discussion is the... -
MDoes it require a special cable between brick and the switch / control head. Bought a flat 8 pin cable and no go on power.
-
JJmarico1 replied to the thread Wanted: Vintage Fireball teardrop light.I think I have one I will look tomorrow and let you know.
-
SHello everyone, Looking for some advice on replacing the Tomar Rect 25 led heads on our engine. Many of them are developing problems and we need to find a replacement. I'd prefer to go with...
-
Tango7 replied to the thread Whelen XLP Visor Bar from Wecan to WecanX.According to a discussion in the... -
Tango7 replied to the thread Tornado Sirens.I've seen a few websites dedicated to civil defense / tornado sirens, but I don't know if there's any formal organizations.
-
LLED reacted to fbueller's post in the thread For Sale: Vintage Federal Signal Streethawk Blue New Old Stock $400 with
Like.
New old stock Federal Signal Streethawks in original boxes. These have four upper rotators and a center speaker housing. They do not have any lower level flashers, takedowns, center speaker or... -
SWhere on the internet do collectors of tornado sirens congregate? Is there a society, club, or organization for the preservation of tornado sirens? I'm not necessarily looking for enthusiasts...
-
Sshues replied to the thread Federal Signal PA70 No Sound Output.Does the connector look something like what appears in this thread but with six pins? If so, then your search terms should include Beau, Cinch, and Jones.
-
EEscalator Slinky posted the thread Federal Signal PA70 No Sound Output in Vintage Equipment Discussion.Hello, I have an old Federal PA70 that powers on and does emit a sound when I listen really closely to the amp itself, but refuses to emit any sound from a speaker. I don't have the actual 6 pin...
-
Looking for 2 fusion dash lights (2x) in red/red or red/white. Prefer hardwire so I can sync. Fine with 40 degree optics but 180 or a mix of 40/180 would be great. Must be the newer style that can... -
DatedGore replied to the thread Interested in finding out a siren model.Maybe an SVP based off the horn? Could you turn the pitch up on these ? -
LLED reacted to Pete L.'s post in the thread Official "Whacker" or "Screwed Up Install" Thread with Like.
Overkill . . . . . .. . and those mini Freedoms aren't cheap.
-
LLED reacted to Sparky_911's post in the thread Official "Whacker" or "Screwed Up Install" Thread with Like.
It looks odd. Poor use of equipment. The bars arent flat mounted and overkill for a rig that small
-
Sparky_911 replied to the thread Official "Whacker" or "Screwed Up Install" Thread.It looks odd. Poor use of equipment. The bars arent flat mounted and overkill for a rig that small