Looking for Fedsig Valor Tricolor ROC information

[Cop]

Hello,

I have a dual color valor in red/blue (split) and additional white.

I want to add a third color on the ROC and have all the needed parts:

My question:

Does someone know how the valor bars are configured to the colors?

1. via main control board
2. via convergence network
3. via individual programming of the module chip on the ROC
4. via parts on the ROC modules

If you have a tricolor Valor/Integrity/CN Signalmaster module, please contact me.

 

[DaCityPolice]

There's a reset procedure for the Valor. I've never done it when swapping boards for additional/different colors but it helps the bar remember what colors it's forgotten.

 

[Cop]

Thank you!

I will try it and give a feedback if it works.

 

[Cop]

It works!!! I'm so happy. Many, many thanks for your help.

I added on the ROC new LEDs, resistors and Mosfets. After the Reset the new colors work fantastic.

Thank you!

 

[TacoMonster]

It works!!! I'm so happy. Many, many thanks for your help.

I added on the ROC new LEDs, resistors and Mosfets. After the Reset the new colors work fantastic.

Thank you!

Wow. I’m impressed! Any chance of sharing a part list and mayyyyybe doing an explainer video?

 

[Cop]

Yes of course! Here are the needed parts for 1 module with 6 LEDs:

- AO3400 A09T 5.7A 30V SOT-23 N-Channel MOSFET SMD transistor or any other SOT-23 N-Channel MOSFET
- 0805 SMD Resistor 1kOhm
- 0805 SMD Resistor 10kOhm
- 6pcs Luxeon Rebel LEDs

I will post a video, but it could take some months.

 

[Cop]

As promised there is the video:

Please note: just do these steps on lightbars that are not used on emergency vehicles.

Many thanks vor your help!