my alley lts now are the single mr 11 single halogen bulb and i want to switch over to the led design bulbs and can not find the double lt design and i was wondering if i could make my own by fab work to the original mr 11 bracket i have now and putting 2 lr 11 super leds in it has anyone done this please let me know tia
Found Alley and Takedown LEDs
- Thread starter 94yj
- Start date
- Status
I was in your shoes a while back with my Freedom. The dual LR11 does use a different bracket and are muy expensive new. I was going to stick a single LR in each end and the MR housing would have needed a LOT of grinding, and it wouldn't guarantee fit. Plus if the job got botched I would be without any alleys until I got new MR housings. I ended up slapping a pair of Feniex T6 dummy heads in as a compromise.
See post number 34 on my thread if interested.
http://elightbars.org/forums/threads/freedom-on-07-silverado-update-11-11-15.64243/
See post number 34 on my thread if interested.
http://elightbars.org/forums/threads/freedom-on-07-silverado-update-11-11-15.64243/
that is an idea do you have a link to where you got the lts at also how did you mount them up to the bar thanks
also do you think one lr 11 would put out that much light or would it require 2 lr 11s also what was the cost of the lights you mentioned thanks
I got them from FEVERinc.net. They are mounted in with the lens clips and 3M VHB tape. 1 - T6 has 6 leds with 35 degree optics. They also come in 20 degree optics. Figure about 40 a piece once you add shipping, or 45 a piece if you get the 20 degrees heads (pull down menu).
Link: http://feverinc.net/feniex-cobra-series-tir6-dummy-replacement-modules.html
Link: http://feverinc.net/feniex-cobra-series-tir6-dummy-replacement-modules.html
- Status