Converting Competitor Justice to Wecan

[wsvjr]

Is it possible to convert a competitor justice bar to a Wecan model? Is it a simple board swap or more intensive?

 

[got_yogurt]

You can. It'll probably cost you more to do it than the bar is worth though

 

[wsvjr]

Darn, my patrol car has a competitor justice. I really wanted to enable low power, cruise lights, and the arrow stick function. Any ideas?

 

[C17LVFD]

All functions could be wired without needing a wecan board.


It'll require a lil time and patience but it's possible.


For example. The T/A functions... Pickup at Whelen T/A led box, sorry forget the model number off the top of my head for your rear heads and rewire.


Cruise lights: there's a thread here about using diodes for cruise lights on a non wecan Liberty.


Low power: I believe is just a voltage drop to the LEDs, some type of systemic resistor for the bar should be effective. I haven't done the low power personally so someone else might chime in.


Definitely easy to accomplish the T/A and the cruise lights with a lil rewiring. And it's significantly cheaper than buying a wecan board.


Good Luck!


Seth

 

[wsvjr]

All functions could be wired without needing a wecan board.

It'll require a lil time and patience but it's possible.

For example. The T/A functions... Pickup at Whelen T/A led box, sorry forget the model number off the top of my head for your rear heads and rewire.

Cruise lights: there's a thread here about using diodes for cruise lights on a non wecan Liberty.

Low power: I believe is just a voltage drop to the LEDs, some type of systemic resistor for the bar should be effective. I haven't done the low power personally so someone else might chime in.

Definitely easy to accomplish the T/A and the cruise lights with a lil rewiring. And it's significantly cheaper than buying a wecan board.

Good Luck!

Seth

Do you happen to have the link for the thread on the cruise lights? I cannot find it :-(