911ep millennium question help please

[Sta25ems]

I have the last new version of the 911ep millennium light bar with the new cid. Now I just got it a few weeks ago and it worked fine. I went to install and seen one module was out then the whole bar won't light up. When I connect the wires some of the modules come on for a very split second then nothing. The controller lights up along with the power light to the cid but the N opplight does not come on like it did before I installed. Any help would be appreciated thanks.

 

[tsquale]

@Sta25ems are you sure you have it wired back up correctly? RX and TX wires aren't mixed up? Good ground and power source (not a jumper pack).

Here is the install guide.

 

[Sta25ems]

@Sta25ems are you sure you have it wired back up correctly? RX and TX wires aren't mixed up? Good ground and power source (not a jumper pack).

Here is the install guide.

If the motherboard would have went bad the fuses would have blew correct because all fuses are good

 

[tsquale]

Possibly. Could quit working on it's own. Double check your wiring

 

[Sta25ems]

Well if you know anyone that needs parts for it let me know