The three patterns are:
Yeah I definitely think it's a much more eye-catching pattern versus the standard wigwag.
That is AWESOME!!! Thank you fp13-2!! That third pattern is the way to go - THAT should be the factory standard flash. Did you have the dealer program it or is that something that can be changed with Forscan?
I did it with Forscan. I'm fairly certain this is the value that I used. Changed it to 23...I think.
I would need to pull out my laptop to see exactly where those were.
is that the lite version or the full version??
Odd. If I get a chance this afternoon I'll plug into mine and set what it's set at.
If I remember correctly, I tried that Forscan sheet first, and it did not work for me. So the value I posted above is what I changed. Sorry life's been hectic care. I have a chance to connect and see my thing. I should be able to before the weekend.
What SEPD posted is correct. Mine is set to 22 on the value he showed for the combo flash....and I've cracked the code.
On my 2023 FPIU, the code line is: 734-01-01-****-****-2175
In the last box, I changed the second digit from a '1' to a '2', wrote all (button at the bottom), cycled the power off and back on and I got the combo headlight flash pattern.
Here is a screen of the HCM setting (I highlighted what I changed):
View attachment 247009
Let us know if it worked.
*NOTE: In the upfitters guide, it is printed multiple times throughout - do NOT connect Pin 1 (orange) on the white 14 pin harness (wig wag wire) to 12v ( +) . To flash the headlights connect Pin 1 to ground ( -).
I see, that's the issue. You need to have a switch connected to turn the headlight flasher on and off, as SCPD said that wire has to go to ground not to 12 volt positive.
I mostly use Core on these vehicles. I use one of the high amp outputs that can be switched to ground to activate these Wig-Wags. I moved the wrong fuse, and that wig wag wire got 12v positive for a few minutes before I figured out why the WW wasn’t working. Fortunately, it didn’t fry anything. The way they warn you not to do it, I figured something bad would have happened.
I'm having a similar problem, and am curious what you mean about the orange wire?
Do your highbeams work? Ive had the wigwag wire not work, and the highbeams didn’t work either. It took pulling the fuse to reset the system.
High beams work, pulling them back (and froward) along with all other front lights.
Fair Question, I believe so. I'm using (and I believe the orange wire is) the top LEFT with the connector facing you, and that looks to be correct with the orange wire going into the appropriate spot in the back.
