2012 Ford F-150 Install

[skorea2131]

F-150 is a POV used for EMS response.

Controlled by a Feniex Mini 4200, two Whelen Ions in front, a Whelen Avenger 2 on the headliner area, and four Whelen T Series on the rear box. All synchronized through two ULF44’s.

Future plans include a Whelen Siren setup and two Vertex’s in the tail light.

Video

 

[pdk9]

I like it but would’ve preferred both grill lights to be red. Are you allowed to use a HLF?

I’d 100% recommend you putting some lights on the side of the push-bumper to give you some intersection coverage when going code 3. Some red T-ions (to give you the linear optic with off-axis) would be great there.

I wouldn’t recommend putting anything in the tail lights because they’re such a small housing/reflector that they leave a small footprint. If you want something in the lower rear, I would go with red Feniex cannons (2x as bright as the vertex) in the brake lights, and you can wire them to also steady burn with your brake lights

 

[Krsdog25]

Move your rear T ions to the side of the front push bumper and replace them with red strip lite plus. Gives you a much bigger footprint and better side/intersection warning for barely more than the vertex you were going to buy.